Homeowner guide
How to prepare for a tiling quote
The details and photos that let a tiler quote your job accurately the first time.
A tiling quote is only as accurate as the information behind it. The more a tiler knows about the space, the surface and the tile, the fewer surprises there are later, for you and for the tiler.
1. Measure the areas
For floors, multiply length by width for each room. For walls, measure the width of each wall and the height you want tiled, then subtract large openings such as windows and doors. Rough figures are fine; the tiler will confirm them.
2. Know your tiles
Note the tile size, material (ceramic, porcelain or natural stone) and finish. Size matters: large-format tiles need flatter surfaces and more handling, while small mosaics and finger tiles take longer to lay. If you have not chosen yet, photos of the look you like are enough to start.
3. Photograph the space
Take two or three photos of each area: a wide shot plus close-ups of the floor and any existing tiles, cracks or uneven spots. This shows the tiler what preparation may be needed.
4. Describe the current surface
Is it a new slab, sheeting, existing tiles or timber? Is anything being removed first? The surface under the tiles decides much of the preparation work.
5. Be clear about who supplies what
Say whether you are buying the tiles yourself or want the tiler to coordinate materials, and who is handling other trades such as plumbing, electrical or wet-area membrane work.
6. Share your timing
Give a target window rather than a single date, and mention anything fixed, such as a move-in date.
Checklist
- Suburb and access details
- Areas and approximate square metres
- Tile size, material and quantity (if bought)
- Photos of each area
- Current surface and anything being removed
- Who supplies materials and other trades
- Preferred timing
Ready? Send your details through our residential quote form.
More guides
General information only. It is not a quotation or professional advice for your specific job.